Total Organic Carbon
|
| Linear Range |
0.03 to 2,500 ppb as TOC |
| Accuracy |
± 5% of measurement; ±0.1 ppb |
| Precision |
± 1% of measurement; ±0.3 ppb |
| pH Range |
5.5 to 8.0 in order to meet accuracy specification |
| Analysis Modes |
On-line, on-line averaged, on-line timed, Grab |
| Analysis Time1,2 |
3 minutes for continuous online measurements |
| Ozone Compatibility |
50 ppb O3 continuous; 200 ppb 03 for 2 hours daily |
| External Flow Rate |
Minimum 50 mL/min |
| Sample Temperature |
1–95 °C (34–203 °F) (withstands short-term exposure) |
| Sample Pressure |
Up to 100 psig |
| Interferences |
Insensitive to organic heteroatoms |
| Calibration Stability |
Typically stable for 12 months |
| Display Readout |
3 significant digits |
Conductivity
|
| Raw Conductivity Range |
0.01 to 800 µS/cm |
| Conductivity Accuracy |
0.005 µS/cm or 1%, whichever is greater |
| Conductivity Precision |
<1.0% RSD |
Instrument
|
| Power Requirements |
100–240 VAC, 70 W, 50/60 Hz |
| Fuses |
No user-replaceable fuses |
| Normal Operating Environment |
Intended for indoor use only |
| Ambient Temperature |
5–40°C (41–104°F) |
| Maximum Relative Humidity |
Up to 95%, noncondensing |
| Maximum Altitude |
3,000 m (9,843 ft) |
| Inputs |
Two isolated binary inputs |
| Outputs |
Serial (RS-232), one USB, three 40-20 mA, four alarms, one Ethernet |
| Installation/Overvoltage |
II (protects against transients present in Category II power) |
| Safety Certifications |
CE, ETL listed. Conforms to UL Std. 61010-1. Certified to CSA 22.2 No. 61010-1. |
| Pollution Degree |
2 (normally only non-conductive pollution) |
| Display |
Backlit 10.1″, 1280×800, touchscreen display |
| Size |
H: 43.4 cm (17.1 in); W: 55.9 cm (22.0 in); D: 28.7 cm (11.3 in) |
| Weight |
16.3 kg (36 lb) |
| IP Rating |
IP 55 |
| Optional Wi-Fi |
802.11ac/a/b/g/n Dual-band 2.4/5 GHz |
| Industrial Communications Protocol |
Modbus TCP/IP |
